Clamp Saddle With Stainless Steel (AISI304)
Bolt Stainless Steel Reinforcing Ring (AISI430)

Pressure Values
Ø 25 mm – Ø 110 mm : PN 16
2” – 2 ½” : PN 10
Ø 125 mm – Ø 225 mm : PN 10
3” – 4” : PN 6
Installation Areas
Urban Potable Water Networks – Landscaping Systems
Agricultural Irrigation – Greenhouses

Product Description

  • Clamp Saddle With Stainless Steel (AISI304) Bolt Stainless Steel (AISI430) Reinforcing Ring
  • Installation Instructions
  • Specification
  • Assembly Methods
  • Tests

Code Size Packing Qantity Box Qantity
100160201 25 x ½” 25 300
100160301 32 x ½” 25 250
100160302 32 x ¾” 25 250
100160401 40 x ½” 25 200
100160402 40 x ¾” 25 175
100160501 50 x ½” 10 160
100160502 50 x ¾” 10 150
100160503 50 x 1″ 10 130
100160601 63 x ½” 10 110
100160602 63 x ¾” 10 110
100160603 63 x 1″ 10 100
100160604 63 x 1¼” 10 80
100160605 63 x 1½” 10 80
100160701 75 x ½” 5 90
100160702 75 x ¾” 5 90
100160703 75 x 1″ 5 80
100160704 75 x 1¼” 5 55
100160705 75 x 1½” 5 50
100160706 75 x 2″ 5 50
100160801 90 x ½” 5 75
100160802 90 x ¾” 5 70
100160803 90 x 1″ 5 60
100160804 90 x 1¼” 5 40
100160805 90 x 1½” 5 40
100160806 90 x 2″ 5 40
100160901 110 x ½” 5 55
100160902 110 x ¾” 5 55
100160903 110 x 1″ 5 50
100160904 110 x 1¼” 5 35
100160905 110 x 1½” 5 35
100160906 110 x 2″ 5 30
100161001 125 x ½” 2 44
100161002 125 x ¾” 2 44
100161003 125 x 1″ 2 40
100161004 125 x 1¼” 2 40
100161005 125 x 1½” 2 40
100161006 125 x 2″ 2 40
100161101 140 x ½” 2 36
100161102 140 x ¾” 2 36
100161103 140 x 1″ 2 36
100161104 140 x 1¼” 2 36
100161105 140 x 1½” 2 36
100161106 140 x 2″ 2 28
100161201 160 x ½” 2 26
100161202 160 x ¾” 2 26
100161203 160 x 1″ 2 26
100161204 160 x 1¼” 2 24
100161205 160 x 1½” 2 24
100161206 160 x 2″ 2 22
100161207 160 x 2½” 2 16
100161208 160 x 3″ 2 12
100161209 160 x 4″ 2 12
100161302 180 x ¾” 2 10
100161303 180 x 1″ 2 10
100161304 180 x 1¼” 2 10
100161305 180 x 1½” 2 10
100161306 180 x 2″ 2 10
100161307 180 x 2½” 2 10
100161308 180 x 3″ 2 10
100161309 180 x 4″ 2 8
100161402 200 x ¾” 2 10
100161403 200 x 1″ 2 10
100161404 200 x 1¼” 2 10
100161405 200 x 1½” 2 10
100161406 200 x 2″ 2 8
100161407 200 x 2½” 2 8
100161408 200 x 3″ 2 8
100161409 200 x 4″ 2 8
100161503 225 x 1″ 2 8
100161504 225 x 1¼” 2 8
100161505 225 x 1½” 2 8
100161506 225 x 2″ 2 8
100161507 225 x 2½” 2 8
100161508 225 x 3″ 2 8
100161509 225 x 4″ 2 8

Clamp saddles should be kept away from hard and sharp objects during the storage and installation. If the installation is laid under the ground, it should be covered with sand to protect it from hard and sharp objects. Any damaged adaptor should not be used absolutely.


The o-ring should be placed in its socket properly in order not to be unsettled during the installation.


Male adaptors to be used with Clamp Saddles, should be wrapped up with the teflon band with the tightening direction and should be wrapped enough to prevent leakage.


Drilling the pipe after the installation of Clamp Saddles can cause the damage of the threads. Thus, drilling must be carried out in a way that it does not touch the threads with a suitable drill bit.


If the dimension of the installed pipes is bigger than the standard values upper and lower parts will not contact each other. Under these circumstances, there is no need to tighten the bolts till the upper and lower body parts contact or hammer the slides to the end point.


Bolts and nuts must be tightened mutually balanced during installation of the Clamp Saddles.

Final Check of the Installation

VISUAL CHECK

During installation, the system should be checked visually in order to determine the damaged clamp saddles.

LEAKPROOFNESS CHECK

After the installation, the system should be checked with water in testing pressure to determine the water leak.

CONDITIONS THAT MAY CAUSE LEAKAGE

● Pipe sizes do not comply with international standards,

● Other metal or plastic materials used do not comply with international standards,

● Not to use the teflon band sufficiently and suitably,

● Incorrect installation of the Clamp Saddles during installation,

● Damage of the threads of the Clamp Saddles during pipe drilling with the drill,

● Damage or displacing of the oring during the installation,

can cause leaking in your installation.

It has been produced from high quality polypropylene raw material and it has resistance to impact.


It is designed to prevent leakage caused by the size differences of the pipes.


O-rings are made of rubber and provide leakproofness under high pressure.


Thanks to the corrosion resistant metal ring used in our products, it can be used safely in systems not exceeding 50 ⁰C.


It does not contain any harmful compounds which can change the taste or the smell of the water.


It is suitable to be used for drinking water.


Reinforcing ring, bolt, nut and washers are varied as stainless steel and galvanized.


Because the nuts are inserted in their housing on the lower part, it provides quick and easy installation.


 Thread sizes are compatible with ISO 7-1 Standard.


 It is compatible with ISO 13460-1 Standard.

Assembly Methods

 


Poelsan

Contact Information

Working Hours
Monday to Friday 08.00 – 18.00
+90 (538) 519 31 19

+90 (362) 266 75 24

+90 (362) 266 77 51

www.poelsan.com

poelsan@poelsan.com

Global Brand In The Sector

We have 550 points in 75 countries…





Your Ideas Are Important To Us

Customer Satisfaction Survey





Social Media

Follow Our Activities

Fairs, Products and many of them are in our Social Media Accounts.